NC Series

HQ Series

The utilization of machine including bending extruded shapes, square and rectangular tubes, pipe,, and channels.


HQ Series

Max. Tube O.D.: ø76.2(O.D) x 3.0(W.T.)mm
Max. Bending Radius: 450mm

Figure-touched interface


  • Figure-touched interface – simply touch the corresponding figures & words to proceed the operation.
  • The panel displays the movement situation of the machine and bending angle.


The characters of Controller


  • Operation Mode manual, semi-automatic, fully-automatic, program input and modification.
  • Control-axis Bending axis C
  • Max. Bends / per program : 16 Bends.
  • Max. Memorized Programs : 200 sets.
  • Action setting workload counter, mandrel on/ mandrel off option, Pressure die booster function, slow mandrel-backward function / special equipment.




  • Pressure die booster is controlled by individual hydraulic cylinder that enhances the processing stabilization.
  • The quick tooling change system is favor of production.


Modularized design


  • Modularized design on circuit, easy maintenance and replacement.
  • Auto detective and error movement indicating functions prevent machine from being damaged by wrong operation.


Multi-protection design


  • Mobile pedal switch and side emergency stop switch keep users from dangers.
  • Code protection function guards the program and process data.
  • Overload protection of main motor, monitoring of mechanical, anti-unreasonable operation.


Spec / Model HQ-800NCAD
Max. Tube O.D. & W.T. (O.D. x t) Mild Steel (mm) ø76.2 x 3.0t
Stainless Steel (mm) ø65.0 x 2.5t
Rectangle Pipe (mm) □65.0 x 2.0t
Max. Draw Bending Radius (mm) 450
Max. Bending Angle (degree) 210°
Per 90° Speed/Sec 10
Bending Accuracy ±0.1
Max. Effective Distance of Mandrel(mm) 2500
Horse Power 18HP
Machine Size (L x W x H)(m) 4 x 1.5 x 1.4 mm
Machine Weight (kgs) 3500

1.Due to the continuous improvement on design, the specifications above are subject to change without notice.

2.Max. Effective Distance of Mandrel(mm) can be extended as request.

3.H-series without “Q” means “No mandrel Seat device is equipped”.

Read More